Xiaomi Electric Inflator 2 MJCQB06QW is a second-generation inflator that inflates tires faster. Xiaomi Electric Air Pump 2 MJCQB06QW has a preset pressure and stops when full. Digital tire pressure detection and inflation pressure up to 150PSI.

feature of product

• High-precision cylinder supports pressure up to 150 psi. The 19mm high-precision alloy die-cast cylinder is used, and the inflation pressure can reach 150 psi. It only takes 86 seconds* to inflate high-pressure bicycle tires.
• Preset pressure, stop when full, accurately display the tire pressure value required for real-time tire pressure setting, or select the preset mode to inflate with a single button. Automatically stops inflation, no need for continuous supervision, more convenient to use. Using a digital chip air pressure sensor, the tire pressure detection accuracy is up to ±1psi*.
• The inflation performance is improved. After being fully charged, the inflating hardware of ten tires can be upgraded, showing better energy efficiency. After being fully charged, it can continuously inflate ten tires*, or continuously inflate two empty tires*, making daily maintenance simple and easy.
• Six preset inflation modes are easy to use Use a single button to switch between six modes and set the preset air pressure range to avoid over-inflation. Manual mode can memorize pressure values. Just set it once and you can get rid of tedious settings.
• The new quick-connect valve adapter allows quick installation without dirtying your hands. The new quick-connect valve adapter allows you to install the valve easily and quickly. Rich accessories, versatile.
• The lightweight body makes it easier to carry. It weighs only about 490g* and has a simple design, making it easy to carry around. Fits well in a backpack, in the car, or at home. It is lightweight, stylish and does not take up space.

*When fully charged, the device can inflate a 205/55 R16 car tire from 0bar to 2.5bar in approximately 8 minutes at an ambient temperature of 25°C±2°C. *When fully charged, the device can inflate up to 10 205/55 R16 car tires from 2.0bar to 2.5bar at an ambient temperature of 25°C±2°C. The inflating time for each tire is approximately 2 minutes.
*When fully charged, the device can inflate at least 2 205/55 R16 car tires from 0bar to 2.5bar at an ambient temperature of 25°C±2°C.
*At an ambient temperature of 25°C±2°C, if the inflated item is a 700c road bicycle tire, it will take an average of approximately 86 seconds to inflate from 0psi to 120psi.
*The tire pressure detection accuracy of Mijia Electric Inflator is ±2psi; the tire pressure detection accuracy of Xiaomi Electric Inflator 2 has been upgraded to ±1psi.
*The weight of Xiaomi Electric Air Pump 2, approximately 490g, refers to the weight of the device itself, excluding the French valve adapter, air needle, quick-connect valve adapter and storage bag.
*The standard equipment of Xiaomi Electric Air Pump 2 does not include a transformer.
*Unless otherwise stated, all information on this page is provided by HOTO Laboratories. Due to different environments, the actual usage process may be slightly different.

product specifications

• Battery type: Lithium-ion battery
• Operating temperature: -10°C to 45°C
• Storage temperature: -10°C to 45°C
• Noise level during operation: < 80dB(A) at a distance of 1 meter
• Charging port: Type-C
• Sensor accuracy: ±1psi
• Product size: Approximately 123 x 75.5 x 45.8mm (only device, excluding trachea)
• Air tube size: Air tube length 200mm (including Schrader valve adapter, excluding threaded end)
• Net weight: about 490g
• Inflation pressure: 0.2–10.3bar/3–150psi
• Charging temperature: 5°C to 40°C
• Rated capacity: 2000mAh (14.4Wh)
• Rated charging voltage: 5V ⎓ 2A
• Charging time: about 3 hours
• Implementation standard: Q/310107QW007
• Valve adapter size (inner diameter): Schrader valve adapter Φ 6.9mm, French valve adapter Φ 6mm, quick-connect valve adapter Φ 6.9mm
• Package contents: Inflator x1, quick-connect valve adapter x1, air needle adapter x1, French valve adapter x1, storage bag x1, charging cable x1, user manual x1

• 購物滿 HKD $500，全港免運費

• 購物滿 MOP $600，澳門免運費

送貨服務：

門市自取服務：

預期出貨時間：

情況一︰貨倉有現貨：

工作天 4PM 前的訂單，我們會安排即日出貨，4PM 後的訂單會於下個工作天出貨 (根據不同產品而定)。

* 星期六、日及公眾假期不出貨

情況二︰貨倉無現貨，但供應商有現貨：

訂單將會於 2 個工作天內送出。

情況三︰貨倉及供應商都沒有現貨，需要預訂：

訂單會於 7 - 14 個工作天寄出，如客人於預訂期間要求取消，而該訂單還未出貨，本店將安排全數退款，否則需要支付 $50 行政費用